The list of notifications (notes, warnings and fatal) of the pre- and post-simulation reports is presented hereafter.
B.1 Isolated objects
Pre-simulation report
Warning | If an object is isolated and is not taken into account for calculation. | The object ‘Object 1’ has no links and is isolated. |
B.2 Hydrology
Virtual Station
Pre-Simulation Report
Fatal | If a Virtual Station exists and is not isolated, but no database is connected to the model. | Missing database to get station data. |
Fatal | If this object exists and a database is connected to the hydrological model, but any dataset is selected for meteorological data utilisation. | No dataset is selected for station ‘Station 1’ (X m, Y m, Z masl). |
Fatal | If this object exists and a database is connected to the hydrological model, but no datagroup is selected in the Data source. | No datagroup is selected for station ‘Station 1’ (X m, Y m, Z masl). |
Fatal | If this object exists and a database is connected to the hydrological model, but a precipitation input is not available in the database. | No precipitation values for station ‘Station 1’ (X m, Y m, Z masl). |
Warning | If this object exists and a database is connected to the hydrological model, but a temperature / ETP input is not available. | No temperature/ETP values for station ‘Station 1’ (X m, Y m, Z masl). A null series will be considered. |
Post-Simulation Report
Warning | If this object does not find data for Precipitation, Temperature or ETP in any station of the database within in the radius of search, search radius is extended until finding one. | No precipitation found 1within search radius of virtual station ‘Station 1’. Radius extended to satisfy No. min of stations. |
Snow-SD model description
Pre-simulation report
Fatal | If this object exists and is connected to other objects, but not all Snow-SD model inputs are available. | The object ‘Snow-SD 1’ has no Precipitation ‘i’ / Temperature ‘T’ as input. |
Runoff (SWMM) model description
Pre-simulation report
Fatal | If the object exists and is not isolated, but has no intensity as input. | The object ‘SWMM 1’ has no Precipitation ‘i’ as input. |
GSM model description
Pre-simulation report
Fatal | If this object exists and is not isolated, but not all GSM model inputs are available. | The object ‘GSM 1’ has no Precipitation ‘P’ / Temperature ‘T’ as input. |
SOCONT model description
Pre-simulation report
Fatal | If this object exists and is not isolated, but not all SOCONT model inputs are available. | The object ‘SOCONT 1’ has no Precipitation ‘P’ / Temperature ‘T’/ETP ‘ETP’ as input. |
HBV model description
Pre-simulation report
Fatal | If this object exists and is not isolated, but not all HBV model inputs are available. | The object ‘HBV 1’ has no Precipitation ‘P’/Temperature ‘T’/ETP ‘ETP’ as input. |
GR4J model description
Pre-simulation report
Fatal | If this object exists and is not isolated, but not all HBV model inputs are available. | The object ‘GR4J’ has no Precipitation ‘P’/ETP ‘ETP’ as input. |
SAC model description
Pre-simulation report
Fatal | If this object exists and is not isolated, but not all SAC model inputs are available. | The object ‘SAC’ has no Precipitation ‘P’/ETP ‘ETP’ as input. |
B.3 Rivers
Channel routing description
No fatal, warnings or notes messages for this object.
B.4 Standard objects
Junction
No fatal, warnings or notes messages for this object.
Time Series
Pre-simulation report
Fatal | If this object if used and is not isolated, but the H-Q paired data is not provided. | Times Series ’Time series 1’is missing paired data values. |
Source
Pre-simulation report
Warning | If a source object exists and no database is connected to the model. | Missing database to get source data. |
Warning | If no group is selected in the Data source for sources. | Missing database group to source data. |
Warning | If this object is used and is not isolated, but the source has no a station from database to provide data series. | No station or sensor for source ‘Source 1’. |
Comparator
No fatal errors, warnings or note messages for this object
Sub-model
No fatal errors, warnings or note messages for this object
Group Interface
No fatal errors, warnings or note messages for this object
B.5 Structures objects
Reservoir
Pre-simulation report
Fatal | If this object is used and is not isolated, but the H-V paired data is not provided. | Reservoir ‘Reservoir 1’ is missing H-V paired data. |
Fatal | If this object is used and is not isolated, but does not have an inflow. | The object ‘Reservoir 1’ has no Flow ‘Qe’ as input. |
Warning | If the initial level of the reservoir is out of the range proposed in the H-V paired data. The simulation is achieved, assuming the level equals to the maximum level of the reservoir. | Hini of reservoir ’Reservoir 1’is out of range. |
Note | If a Reservoir object exists but no database is connected to the model. | Missing database to get initial height of reservoirs. |
Note | If no group is selected in the Data source for reservoirs. | Missing database group to get HPP data. |
Note | If the reservoir uses the initial condition proposed by the user (and not data from database as initial condition). | Hini of reservoir ’Reservoir 1’used as initial height. |
Note | If the reservoir uses the initial condition from the database. | Initial height of reservoir ‘Reservoir 1’ taken from database. |
Post-Simulation Report
Warning | If the volume becomes negative in a moment of the simulation. Nevertheless, the simulation is computed (with a correct volume variation, V; keeping the reservoir level, H, in zero for negative volumes). | Volume of reservoir ‘Reservoir 1’ contains negative values. |
Warning | If the volume exceeds the maximum volume proposed in the relation H-V. Nevertheless, the simulation is computed (with a correct volume variation, V, keeping the reservoir level, H, to maximum value of paired data H-V when volume exceeds the maximum volume). | Volume of reservoir ‘Reservoir 1’ exceeds its capacity. |
HQ
Pre-simulation report
Fatal | If this object is used and is not isolated, but the H-Q paired data is not provided. | HQ ’HQ 1’is missing H-Q paired data. |
Post-Simulation Report
Warning | The computed simulation runs even if the level is equal or over the maximum level proposed in the relation H-Q. In that case, the outflow is kept as the maximum discharge existing in the relation H-Q. | The maximum level of HQ ‘HQ 1’ has been attained or exceeded. |
Turbine
Pre-simulation report
Fatal | If this object is used and is not isolated, but do not receive the Qwanted data as input. | The object ‘Turbine 1’ has no Flow ‘Qwanted’ as input. |
TurbineDB
Pre-simulation report
Warning | If a TurbineDB object exists and no database is connected to the model. | Missing database to get TurbineDB data. |
Warning | If this object if used and is not isolated, but no group is selected in the Data source for TurbineDB. | Missing database group to get TurbineDB data. |
Warning | If this object if used and is not isolated, but the TurbineDB has not a station from database to provide data series. | No station or sensor for TurbineDB ‘TurbineDB 1’. |
Hydropower
Pre-simulation report
Fatal | If this object if used and is not isolated, but the Q-η paired data is not provided. | Hydropower ’Hydropower 1’is missing paired data values. |
Warning | If a source object exists and no database is connected to the model. | Missing database to get Hydropower data. Default Price value(s) will be used. |
Warning | If no group is selected in the Data source for sources. | Missing database group to get Hydropower data. Default Price value(s) will be used. |
Warning | If this object is used and is not isolated, but the consumer has not a station from database to provide data series. | No station or sensor for Hydropower ‘Hydropower 1’. Price defined from Default Price. |
Diversion
Pre-simulation report
Fatal | If this object if used and is not isolated, but the QUp-QDiverted paired data is not provided. | Diversion ’Diversion 1’is missing QUp-QDiverted paired data. |
Consumer
Pre-simulation report
Warning | If a source object exists and no database is connected to the model. | Missing database to get Consumer data. Default QDemand values will be used. |
Warning | If no group is selected in the Data source for sources. | Missing database group to consumer data. Default QDemand values will be used. |
Warning | If this object is used and is not isolated, but the consumer has not a station from database to provide data series. | No station or sensor for Consumer ‘Consumer 1’. Consumption defined from Default QDemand. |
B.6 Planner object
Planner
Pre-simulation report
Fatal Error | A rule in required. | The planner ‘Planner 1’ has no rules defined. |
Rules
Pre-simulation report
Fatal Error | A condition is required. | The rule ‘Rule 1’ in planer ‘Planner 1’ has no condition defined. |
Conditions
Pre-simulation report
Fatal Error | An input is required. | The condition ‘Condition 1’ in ‘Rule 1’ of ’ Planner 10 has no input defined. |
Fatal Error | An object is required. | The condition ‘Condition 1’ in ‘Rule 1’ of ’ Planner 10 has no object defined. |
Fatal Error | A result is required. | The condition ‘Condition 1’ in ‘Rule 1’ of ’ Planner 10 has no result defined. |